the various Black Level
features.
DigitalTap3: Selects which
Black Level is controlled by
the various Black Level
features.
DigitalTap4: Selects which
Black Level is controlled by
the various Black Level
features.
BlackLevel 0.000 100.000 - -
Controls the analog black
level as an absolute physical
value. This represents a DC
offset applied to the video
signal.
BlackLevelAuto - - -
Off,
Continuous
Controls the mode for
automatic black level
adjustment. The exact
algorithm used to implement
this adjustment is
device-specific.
Off: Analog black level is user
controlled using BlackLevel.
Continuous: Analog black
level is constantly adjusted by
the device.
Feature Name Min Max Inc Valid Values Documentation
mvLogicGateControl
Contains features to control
the devices Logic Gate
Control parameters.
mvLogicGateANDSelector - - -
mvLogicGateAND1,
mvLogicGateAND2,
mvLogicGateAND3,
mvLogicGateAND4
This enumeration selects the
AND gate to configure.
mvLogicGateAND1: Selects
the AND gate to configure.
mvLogicGateAND2: Selects
the AND gate to configure.
mvLogicGateAND3: Selects
the AND gate to configure.
mvLogicGateAND4: Selects
the AND gate to configure.
mvLogicGateANDSource1 - - - Off,
Line4,
Line5,
ExposureActive,
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3,
This enumeration can be
used to select the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Off: Selects the first input
signal of the AND gate
selected by
20 Appendix A.1 Pregius CMOS specific camera / sensor data
784
To Next Page
Loading...