Matrix mvBlueFOX3 - Page 840

mvBalanceWhiteAutoHeight 0 2056 1 -
Common AOI Height
used for Auto Gain
Control(AGC), Auto
Exposure Control(AEC)
and Auto White
Balance(AWB).
Feature Name Min Max Inc
Valid
Values
Documentation
mvCustomData
Contains features to control
custom data.
mvSensorRegister 0x0 UINT_MAX 0x1 -
Sensor register address to
access.
mvSensorRegisterValue 0x0 UINT_MAX 0x1 - Value of sensor register.
Feature Name Min Max Inc Valid Values Documentation
mvLogicGateControl
Contains features to control
the devices Logic Gate
Control parameters.
mvLogicGateANDSelector - - -
mvLogicGateAND1,
mvLogicGateAND2,
mvLogicGateAND3,
mvLogicGateAND4
This enumeration selects the
AND gate to configure.
mvLogicGateAND1: Selects
the AND gate to configure.
mvLogicGateAND2: Selects
the AND gate to configure.
mvLogicGateAND3: Selects
the AND gate to configure.
mvLogicGateAND4: Selects
the AND gate to configure.
mvLogicGateANDSource1 - - - Off,
Line4,
Line5,
ExposureActive,
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3,
Timer1Active,
Timer2Active,
Counter1Active,
Counter2Active,
Counter3Active,
Counter4Active,
AcquisitionActive,
FrameActive,
LineActive,
FrameTriggerWait,
mvTemperatureOutOfRange
This enumeration can be
used to select the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Off: Selects the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Line4: Selects the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Line5: Selects the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
ExposureActive: Selects the
first input signal of the AND
gate selected by
20 Appendix A.1 Pregius CMOS specific camera / sensor data
832