Matrox Extio 3 Series - Page 101

Matrox Extio 3 Series – User Guide 101
 Scope – Under the remote IP address, add the IP range you want to use for your
transmitter. You can use a range (such as
192.168.1.0/24 ) or a single IP address (such
as
192.152.168.62 ).
 Action – Select Allow the connection .
 Profile – Select the network location of your system ( Domain , Private , or Public ).
 Name – Enter the name for your rule (such as Extio 3 – ICMPv4 rule ).
For more information on configuring your Windows firewall, see your network
administrator.