Mazda 2006 MX-5 - Drive-By-Wire Control Block Diagram [Lf]

CONTROL SYSTEM
01–40–12
DRIVE-BY-WIRE CONTROL BLOCK DIAGRAM [LF]
E5U014000000N64
• The PCM calculates the throttle valve opening angle matching the engine operation conditions from the
following input signals and sends a duty signal to the throttle valve actuator.
End Of Sie
REFRIGERANT
PRESSURE SWITCH
(MIDDLE)
MAF SENSOR
IAT SENSOR
MAP SENSOR
CKP SENSOR
ECT SENSOR
A/C AMPLIFER
REFRIGERANT
PRESSURE SWITCH
(HIGH, LOW )
GENERATOR
(TERMINAL P: STATOR COIL)
BARO SENSOR
NEUTRAL SWITCH (MT)
CPP SWITCH (MT)
BRAKE SWITCH NO.1, NO.2
VEHICLE SPEED SIGNAL
PCM
TR SWITCH (AT)
TROTTLE VALVE
ACTUATOR
TP SENSOR NO.1, NO.2
APP SENSOR NO.1, NO.2
TCM (AT)
CRUISE CONTROL SWITCH
IGNITION SWITCH
DSC HU/CM
PSP SWITCH
E5U140ZT5002