AIR BAG SYSTEM
08–10–16
PRE-TENSIONER SEAT BELT CONSTRUCTION/OPERATION
E5U081057630N02
Construction
Operation
Normal (Seat Belt Pretensioners Not Operating)
• Normally, the clutch roller installed to the outer circumference of the spindle sits in the recess of the gear and
does not interfere with the spindle.
• The gear does not rotate when the belt is pulled or retracted because the spindle and gear are not engaged.
CAP NUT
GAS GENERATOR
CYLINDER
SPINDLE
BASE
PISTON
CLUTCH
ROLLER
GEAR
COVER
SPRING SEAT
SPRING SHAFT
SPRING
SPRING CASE
EPU810ZT3011
To Next Page
Loading...
