6.1 - PRELIMINARY CHECKS
The operator must verify that the machine is supplied with:
• Machine and equipment user manual;
• Check/service booklet;
• Engine manual;
• Technical annexes;
If the machine is resold as a “second hand” machine, the customer / user must provide the purchaser with
the complete use and maintenance manual as well as the inspection log book.
6.2 - CHECKS TO BE PERFORMED AT THE START OF EACH WORKING DAY
• Carry out an external inspection of the machine (joints, hoses, hydraulic components, etc.) and check
for any leaks of oil or other liquids.
• Check the rubber hoses of the machine and make sure there are no cuts, holes, scratches, leakages,
etc.
Never search for oil leaks with bare hands or other body parts;
use paper or cloths to locate the leak. Always wear waterproof
gloves and eye protection.
6.2.1 - CHECKING THE CHROME-PLATED PARTS
Carry out an inspection of the chrome-plated parts of the machine (jacks) and check that they are not
scratched or damaged. In the case of damage, replace.
To Next Page
