Before moving the machine, ensure full knowledge of the function of the controls
and safety standards associated with them. The operator must be in the vicinity
of the machine. Before moving the machine, ensure that nobody is within the
operating range of the machine and that the action range is free from obstacles.
Exert caution before starting to reverse and always check for the presence of
persons, work equipment or obstacles.
• Before starting to cut, check that there are no foreign bodies such as stones, pieces of metal or
animals on the surface to be mowed;
• Only cut grass and light brushwood that the machine is capable of processing without difficulty;
• When mowing slopes always start from the bottom;
• Always turn round in an upwards direction;
• Never go down slopes with an incline of more than 45°;
• Never stand directly in the line of fall of the machine;
Never change the direction of the machine while moving on curbs, rocks or surfaces with large
differences in height (greater than 20 cm). In these cases, always proceed perpendicular with respect
to any obstacles.
When reversing uphill, do not change direction in the transition area between the flat ground and the
slope. If it is unavoidable to do so, carry out the manoeuvre gradually.
To Next Page
Loading...