6.3.16 - AUXILIARY FUNCTION (AUX 2)
The auxiliary function (AUX 2) is controlled by the switch (15).
• The auxiliary function is enabled by pressing the switch up.
• The auxiliary function with the opposite effect is enabled by pressing the switch down.
• The central switch position is neutral.
NOTE: Refer to the use and maintenance manual of the tool connected to the machine for how
to use this function.
6.3.17 - AUXILIARY FUNCTION (AUX 3)
The auxiliary function (AUX 3) is controlled by the button (9).
• The auxiliary function is enabled by pressing the button.
NOTE: Refer to the use and maintenance manual of the tool connected to the machine for how
to use this function.
To Next Page
