McConnel ROBOCUT2 RC40 - 6.3.5 Engine RPM Check; 6.3.6 Slow;Fast Travel Switch

43
McCONNEL
6.3.5 - ENGINE RPM CHECK
The buttons (14) on the left-hand side of the remote control are used to increase (A) and decrease (B)
the engine revs.
Press the buttons repeatedly or hold them down (A) (B) to adjust the revs.
6.3.6 - SLOW/FAST TRAVEL SWITCH
Press the switch (3) up to engage fast gear or down to engage slow gear.
14
A
B
3