McConnel ROBOCUT2 RC40 - Fluids, Greases, and Coolant; 9.3 Extraordinary Interventions; 9.4 Fluids and Greases; 9.4.1 Table

83
McCONNEL
9.3 - EXTRAORDINARY INTERVENTIONS
These are repairs or replacements of one or more components of the machine, which usually become
necessary after a few years of efficient operation and which do not alter the characteristics of the
machine. In the case of considerable changes, the manufacturer shall not be held responsible for
possible hazards which might arise. These interventions must be performed by authorised personnel.
9.4 - FLUIDS AND GREASES
9.4.1 - TABLE
COMPONENT
RECOMMENDED
LUBRICANT
INTERNATIONAL SPECIFICATIONS
ENGINE
Q8 FORMULA TRUCK
8600 10W-40
API CJ-4
HYDRAULIC
SYSTEM
Mineral Oil
ISO 46
Q8 HELLER 46
DIN 51 524, 2-HLP
DIN 51 524, 3-HLP
API CD, CE, CF
HYDRAULIC
SYSTEM
Biodegradable Oil
PANOLIN BIO HLP SYNTH E
FZG Test A/8.3/90 stage 12
ISO 15380 HEES
PINS AND
BUSHINGS
MOLY GREASE EP
NLGI2 or NLGI3EP GREASE
Black greased with lithium soap with molybdenum
disulphide. For automatic greasing the use of added
CONTACT GREASE NLGI2 with purple lithium soap is
recommended
BEARINGS
PAKELO GREENPLEX EP
NLGI 2 GREASE
EP ADHESIVE Grease,
Aluminium complex soap
ATTENTION
• When using biodegradable oils, avoid mixing them with more than 5% of
other oils.
• The use of non-recommended lubricants and/or greases will result in
invalidity of the warranty.