McConnel ROBOCUT2 RC40 - Engine and Tool Operation; 6.3.3 Stopping the Engine

41
McCONNEL
6.3.3 - STOPPING THE ENGINE
To stop the engine using the remote control, proceed as follows:
1. decrease the engine rpm.
2. Wait about thirty seconds.
3. Press the switch (7) down until the engine switches off.
4. Turn the remote control off by turning the ignition key (10) anti-clockwise.
5. Press the emergency stop button (6) to disable the remote control;
6. Switch off the machine by turning the key to OFF.
7
6
10