McConnel ROBOCUT2 RC40 - 6.3.20 Remote Control Display; 6.3.21 Status LED

54
McCONNEL
6.3.20 - REMOTE CONTROL DISPLAY
The remote control has an LCD display on which some parameters can be viewed which indicate
the machine status during operation.
The parameters displayed are:
rpm of the engine
RPM
Coolant temperature
°C
Fuel tank level
%
6.3.21 - STATUS LED
The status LED indicates the charge and battery status.
• When it flashes and alternates from green to red, it indicates that the battery has run out.