McHale HS2000 - Page 5

McHale HS2000 Round Bale Wrapper
5
6.3 Care of the film roll 40
7 Electronic Control System 42
7.1 Electronic control box 42
7.2 Electronic control box functions 43
7.3 Available wrapping programmes 43
7.4 Electronic control box set-up 44
7.5 Electronic control box features 45
8 Wrapper Operation 54
8.1 Preparing the machine for wrapping 54
8.2 Loading plastic film 55
8.3 Wrapping behind tractor 56
8.4 Wrapping behind baler 57
9 Road Traffic Safety & Operation 59
9.1 Before travelling on any public roadway 59
10 Field Operation & Wrapper Adjustments 61
10.1 Drawbar height 61
10.2 Drawbar length 61
10.3 Dispenser height 62
10.4 Table levelling adjustment 62
10.5 Dispenser arm sensor 63
10.6 Table roller drive chain 63
10.7 Table rollers/belts adjustment 64
10.8 Proximity sensor adjustment (on top arch) 64
10.9 Trip arm switch 65
10.10 Testing trip arm operation 65
10.11 Chain adjustments 66
10.12 Operation of film roll holder 67
11 Accessories & Optional Equipment 68
11.1 Accessories & optional equipment 68
11.2 Remote control kit  68
11.3 Dispenser gear options 68
12 Machine Maintenance 70
12.1 Maintenance intervals 71
12.2 Tightening torque values 74
12.3 Dispenser trip arms 75
12.4 Adjusting dispenser arm rotation speed 76
13 Storage 77
13.1 End of season 77
13.2 Start of season 77
14 Trouble Shooting 78
14.1 Trouble shooting overview 78
14.2 Side lift arm operation 78
14.3 Main lift arm operation 79
14.4 Table operation 80