McHale HS2000 - Page 53

McHale HS2000 Round Bale Wrapper
53
7.5.8 Auto unpark
This option is available on the start menu if the machine has previously been auto
parked.
Press Enter (button 3) to select Auto Unpark; “Unpark Run” is displayed, the loading
arm first moves upwards and the clamp arm opens. After a short pause the loading
arm lowers and the dispensers slowly move forward to the index position, if the combi
programme is selected the clamp arm closes, otherwise it stays open. The held
wrapping film has now crossed the wrapping table and wrapping can commence.
7.5.9 Dispenser rotation
An automatic cycle can only start when the dispensers are in the correct position over
the wheels, “Dispenser Position?” is flashed on the display if the dispensers are in the
incorrect position. In automatic mode, pushing the forward rotate button will rotate the
dispensers forward in slow speed to the correct position under the rotate sensor.
WARNING: The drawbar and spare film roll holder must not be in
the way of the loading arm
The operator must first ensure that the drawbar and spare film roll
holder are in the working position prior to selecting auto unpark.