MD Helicopters 369D - Integrated Interphone Communication System Repairs

CSP-HMI-3MD Helicopters, Inc.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI−3 Book TOC ]
[ Chapter 97 TOC ]
97-06-00
Page 203
Revision 12
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright © 1999−2016 by MD Helicopters, Inc.
structure (Ref. Chap. 96 for electrical
bonding information).
(3). Examine connector plug pins for
looseness, bends or corrosion.
A. Integrated Interphone Communication
System Repairs
(1). Connectors:
With standard practices and tools,
replace broken connector pins. Straight
en bent pins. Tighten or replace loose
pins. (Ref. Sec. 96-00 for additional
information on repair of connectors.)
(2). Wiring Harnesses:
(Ref. Electrical Maintenance - Wiring,
Electrical Bonding, and Wiring Har
nesses, Chap. 96 for information on
repair of wiring harnesses)