MD Helicopters 369D - Installation of Helicopter Equipment; Weight and Balance Data

CSP-HMI-3MD Helicopters, Inc.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI−3 Book TOC ]
[ Chapter 97 TOC ]
97-08-00
Page 907
Revision 12
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright © 1999−2016 by MD Helicopters, Inc.
J. Installation of Helicopter Equipment
After installation of public address and siren
system, a limited number of items must be
replaced in the helicopter. Refer to appropriate
section and perform the following:
(1). Install seats in crew compartment.
(2). If applicable, install stowage box in
pilot's right side floor compartment.
(3). Install left and right access doors on
pilot's floor compartment.
K. Weight and Balance Data
Weight and balance data resulting from
installation of the public address and siren
system is listed in Table 901. After installa
tion, incorporate changes in helicopter weight
and balance records.
Table 901. Weight and Balance Data
Weight
pounds (kg)
Arm
inches (cm)
Moment
in.−lb (kgcm)
−501 (complete)
Added 32.4 (14.696) 47.7 (121.158) 1545.48 (1780.538)
Removed 0.0 0.0 0.0
Changed 32.4 (14.696) 47.7 (121.158) 1545.48 (1780.538)