TA3H, TA3SH & TA3.5SH Page 9 - 17
9. Maintenance
Figure 9.16 - Transmission Pump
1. Blockage indicator
(1) To change the Transmission Pump Filter
Figure 9.17. - Transmission Pump Filter
1. Filter Bowl
PROCEDURE
1. Remove the floor plate.
2. Drain the hydraulic oil.
3. Clean the area around the filter.
4. Unscrew the filter bowl.
5. Remove the old filter element.
6. Clean the inside of the bowl and fit a new element.
7. Refit the filter bowl.
8. Refill the system with clean fresh oil and test for leaks.
COV0008
1
COV0008
1
To Next Page
Loading...
