Page 9 - 6 TA3H, TA3SH & TA3.5SH
9. Maintenance
With the battery removed clean battery terminals and cable connections. When the battery is
reconnected protect connections with grease or petroleum jelly before fitting the plastic terminal
covers.
9.11 Air Cleaner
(1) Daily Maintenance
To access the air cleaner lift the engine cover. Check the blockage indicator, Figure 9.5. If the
indicator is showing RED the air cleaner requires servicing. Check system for leaks.
Figure 9.5 Air Cleaner Blockage Indicator.
PROCEDURE
1. Remove the protective covers from the battery terminals.
2. Disconnect the negative (-ve) cable from the battery.
3. Disconnect the positive (+ve) cable.
4. Undo the nuts and washers and remove the battery clamp.
5. Lift the battery clear of the machine.
NOTICE
Maximum protection against dust is only possible if the air cleaner is serviced at regular intervals.
Check the blockage indicator daily. In dusty conditions checks should be more frequent. If the
indicator shows RED clean or replace the filters immediately. Operating a machine with a
blocked filter can cause serious damage to the engine.
1
COV0006
To Next Page
Loading...
