EasyManua.ls Logo

mecalac TA3SH - Fuel System

Default Icon
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TA3H, TA3SH & TA3.5SH Page 9 - 19
9. Maintenance
9.20 Fuel System
(1) To Add Fuel
The indicator gauge, Figure 9.19; mounted on the tank will indicate the amount of fuel remaining
in the tank. The gauge markings indicate when the tank is Empty, half full or Full.
Figure 9.19 - Fuel Tank
1. Level Gauge
2. Filler Cap
(2) Fuel Filter - Canister Type Element
The fuel filter, Figure 9.20, has a removable canister (1) which must be replaced. It is not a
serviceable item.
bDANGER
Avoid sparks, naked flames etc. when filling or maintaining the fuel system. Do not smoke when
filling the fuel tank or maintaining the fuel system. Do not leave the engine running when filling/
working on the fuel system.
PROCEDURE
1. Remove the filler cap.
2. Add fuel until the gauge reaches the full mark.
3. Refit the filler cap.
4. Clean up any spilt fuel.
1
2
COV00053

Table of Contents

Related product manuals