Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
●
For a Holter procedure: (24 hour to 96 hour)
o Press the Symptom button three (3) times.
●
For all other procedures: (7 day to 30 day)
o The Pendant will initiate on its own.
o If Pendant does not turn on its own, press Power button to turn on pendant.
During the Tele
Patch Procedure:
● Wear the Electrode Patch and Universal Pendant
all day and all night.
●
A physician will determine the duration of the Tele
Patch procedure.
● The Electrode Patch will stay in position for up to seven (7) days.
● The Pendant should always be in the Electrode Patch Cradle.
● Universal Pendant
and Electrode Patch can be worn in the shower and during exercise.
All regular activities can be enjoyed during a Tele
Patch procedure.
TURN THE PENDANT ON BEFORE TAPPING “START PROCEDURE” ON THE Handset AS THE
Handset WILL IMMEDIATELY LAUNCH A PROCESS THAT WILL START COMMUNICATION TO THE
PENDANT VIA BLUETOOTH TECHNOLOGY. IF THE PENDANT IS NOT TURNED ON AT THAT TIME,
THE Handset WILL NOT BE ABLE TO IDENTIFY THE PENDANT.
PENDANT BATTERY NEEDS TO BE CHANGED ABOUT EVERY SEVEN (7) DAYS.
IT IS VERY IMPORTANT TO TURN THE PENDANT OFF BEFORE CHANGING BATTERY,
OTHERWISE DATA MAY BE LOST. THE ON/OFF BUTTON IS LOCATED ON THE FACE OF THE
PENDANT.
THE PENDANT AND BATTERY ARE NOT DISPOSABLE. THE PENDANT SHOULD BE REMOVED
FROM THE CRADLE ON THE ELECTRODE PATCH AND PLACED IN THE CRADLE OF THE FRESH
ELECTRODE PATCH.
IMPORTANT NOTE: If setting up a 24 hour – 96 hour Holter procedure, the procedure set-up is
complete at this point. The Handset is not used with Holter procedures
.
Tele
Patch™ Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E | APRIL 4, 2019
37
To Next Page
Loading...
