Megavoice Envoy 2 E Series - Configuration File Examples

Envoy 2 E Series User Guide 20190805-30.docx || © 2019 MegaVoice Ltd. || Page 42 of 68
Configuration file examples
1. S:0 915,933,955,985,1047
 The buttons are programmable and may be changed by the user
 Button is pre-programmed to 91.5 MHz
 Button is pre-programmed to 93.3 MHz
 Button is pre-programmed to 95.5 MHz
 Button is pre-programmed to 98.5 MHz
 Button is pre-programmed to 104.7 MHz
2. S:0 915,,,,1047
 The buttons are programmable and may be changed by the user
 Button is pre-programmed to 91.5 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is pre-programmed to 104.7 MHz
3. S:0
 The buttons are programmable and may be changed by the user
 This is the equivalent of omitting the FMSET file altogether
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz
 Button is omitted and defaults to 87.0 MHz