Need help?Do you have a question about the Megger MPRT 8430 and is the answer not in the manual?
General| Accuracy | Not found |
|---|---|
| Weight | 17.6 lbs (8 kg) |
| Frequency Range | DC, 10 Hz to 1 kHz |
| Binary Inputs | 8 |
| Binary Outputs | 4 |
| Maximum Current | 30 A |
| Current Range | 0.01 to 30 A |
| Operating Temperature | -10°C to 55°C |
| Storage Temperature | -25°C to 70°C |
| Humidity | 5% to 95% RH non-condensing |
| Power Supply | 100 to 240 V AC, 50/60 Hz |
| Maximum Voltage | 300 V AC/DC |
| Voltage Range | 0 to 300 V |
Describes the front panel controls and indicators for power, reset, binary I/O, and battery simulation.
Explains the touch panel display and control knob interface for manual operation.
Details operation using the TVI, including keypad, alphanumeric, and control knob functions.
Explains how to configure default settings like language, color, and system parameters.
Overview of the TVI's graphical user interface and main menu options.
Provides access to setting and testing impedance or distance relays.
Allows setting and testing of overcurrent relays with IEEE/ANSI and IEC curve types.
Covers setting and testing differential relays with various options.
Details setting and testing procedures for voltage relays.
Covers setting and testing synchronous relays.
Allows setting and testing of power relays according to manufacturer specifications.
Covers setting and testing reclose relays.
Details setting and testing procedures for frequency relays.
Provides manual control and testing of relays in manual mode.
Explains the functionality and setup of the Ethernet port for networking and updates.
Provides guidance on identifying and resolving common operational problems.
To Next Page
