Megmeet MV820 - P40: Fieldbus Option Parameters; P41: IO Option Parameters

265
P24.17
Stop mode for V/F separation
0 to 1
0
0: Frequency and voltage decline to 0 independently
1: Frequency declines after voltage declines to 0
P24.18
Reserved
P24.19
Reserved
For the parameter description, refer to “7.8 P07: Motor 1 V/F control parameters”.
7.23 P40: Fieldbus option parameters
P40.00
Option type
0 to 3
0
0: No communication options
1: PROFINET option
2: EtherCAT option
3: IO option
Others: Reserved
P40.01
Detection time for options
0.0 to 10.0
0.0 s
P40.02 to P40.33
Reserved
7.24 P41: IO option parameters
P41.00
DI9 function selection
0 to 72
0
P41.01
DI10 function selection
0 to 72
0
P41.02
DI11 function selection
0 to 72
0
For the parameter description, refer to “7.10 P09.03 to P09.10”.
P41.03
Terminal open-circuit voltage
0 to 1
1
0: Digital terminal open-circuit voltage 0 V
1: Digital terminal open-circuit voltage 24 V
P41.04
DI9 to DI11 active mode
0 to 0x111
0
Ones:
0: DI9 positive logic active