Megmeet MV820 - Chapter 6 Parameter List; Explanation of Terms Related to Function Codes; Function Codes of Basic Menu

97
Chapter 6 Parameter List
6.1 Explanation of terms related to function codes
Table field
Explanation
Function code number
Represents the number of the function code, such as P00.00
Function code name
Represents the name of the function code, explaining its function
Default value
Represents the factory settings of function codes
Value range
Represents the maximum value and minimum value of function codes
Unit
V: voltage; A: current; ℃: temperature;
Ω
: resistance; mH: inductance;
rpm: rotating speed; %: percentage; bps: baud rate; Hz, kHz: frequency;
ms.s, min, h.kh: time; kW: power; /: no unit.
Change
○: means the function code can be changed during running;
×: means the function code can be changed during stop;
*: means the function code can be read only and can not be changed.
Function code selection
List of function code parameter settings
User-customized setting
Used to set the customized parameter for the user
6.2 Function codes of basic menu
Function
code
Name
Description
Value range
Default
value
Change
P00: System management parameters
P00.00
Menu mode selection
0: Quick menu mode
Only quick commissioning related
parameters are displayed.
1: Full menu mode
All function parameters are
0 to 2
1
○