Megmeet MV820 - Page 98

98
Function
code
Name
Description
Value range
Default
value
Change
displayed.
2: Changed memory menu mode
Only parameters that are different
from factory settings are displayed.
P00.01
User password
0: No password
Others: Password protection
0 to 65535
0
○
P00.02
Reserved
P00.03
Parameter protection
setting
0: All data can be changed.
1: Only main frequency reference
digital setting P02.09 and this
function code can be changed.
2: Only this function code can be
changed.
0 to 2
0
○
P00.04
Selection of key
functions
Ones place: Reserved
Tens place: Function selection of the
STOP key
0: The STOP key is valid only in the
panel control channel.
1: The STOP key is valid in all control
channels.
Hundreds place: Function selection
of multi-function M key
0: No function
1: FWD JOG
2: REV JOG
3: FWD and REV switchover
4: Command channel switchover
(cyclic)
Thousands place: Reserved
0 to 0x0410
0
○
P00.05
Parameter
initialization
0: Parameters rewritable
1: Clear fault records
0 to 3
0
×