Megmeet MV820 - Page 99

99
Function
code
Name
Description
Value range
Default
value
Change
2: Restore to factory settings
3: Restore some parameters to
factory settings (motor parameters
not restored)
P00.06
Power board
upgrading command
0: Disabled
1: Enabled
0 to 1
0
×
P00.07
Parameter copy
0: No operation
1: Drive’s parameters uploaded to
the keypad
2: Keypad’s parameters downloaded
to the drive (all)
3: Keypad’s parameters downloaded
to the drive (excluding motor
parameters)
4: Keypad’s parameters downloaded
to the drive (only motor parameters)
0 to 4
0
×
P01：Status display parameters
P01.00
Main frequency
channel
Refers to P02.05
0 to 8
0
*
P01.01
Main frequency
reference
Displays the main frequency
reference.
0.00 to P02.10
0
*
P01.02
Auxiliary frequency
reference
Displays the auxiliary frequency
reference.
0.00 to P02.10
0
*
P01.03
Frequency reference
Displays the frequency reference
after frequency source calculation.
0.00 to P02.10
0
*
P01.04
Ramp reference
frequency
Displays the ramp reference
frequency.
0.00 to P02.10
0
*
P01.05
Output frequency
Displays the actual output
frequency.
0.00 to P02.10
0
*
P01.06
Output voltage
Displays the output voltage.
0 to 65535 V
0
*