Megmeet MV820 - Page 100

100
Function
code
Name
Description
Value range
Default
value
Change
P01.07
Output current
Displays the output current.
0.0 to 6553.5 A
0
*
P01.08
Torque current
Displays the drive’s current torque
current as a percentage of the
motor’s rated current.
-300.0 to 300.0%
0
*
P01.09
Exciting current
Displays the drive’s current exciting
current as a percentage of the
motor’s rated current.
-300.0 to 300.0%
0
*
P01.10
Keypad version No.
0.00 to 2.55
0.00 to 2.55
0
*
P01.11
Motor power
Displays the drive’s output power as
a percentage of the motor’s rated
power.
-300.0% to 300.0%
0
*
P01.12
Estimated frequency
of motor
Estimated rotor frequency under the
open-loop vector conditions
0.00 to P02.10
0
*
P01.13
Measured frequency
of motor
Displays the actual output frequency
of the motor.
-P02.10 to P02.10
0
*
P01.14
Accumulated power
consumption H of the
drive
0 to 65535 kWh
0 to 65535 kWh
0
*
P01.15
Accumulated power
consumption L of the
drive
0 to 3600
After accumulation of 3600 times, 1
kWh is additionally added to P01.14
0 to 3600
0
*
P01.16
Bus voltage
Displays the bus voltage.
0.0 to 6553.5 V
0
*
P01.17
Operation status of
the drive
Bit0: 0: Stop; 1: Run
Bit1: 0: FWD: 1: REV
Bit2: Zero speed running
Bit3: Accelerating
Bit4: Decelerating
Bit5: Running at constant speed
Bit6: Pre-excitating
0 to 0xFFFF
0
*