MELAG MELAquick 12+ - Page 25

6 First steps
25
Installation examples
MELAdem 40
The feed water is fed from the MELAdem 40 ion exchanger. The water is discharged into the wastewater container.
1.1
3.1
3
4
5.1.1
5.1
5
5.5
3.3
2
1.2
5.3
3.2
5.2
5.4
Position Description Art. no. contained in
1 Mounting set EN 1717 for MELAdem ME49600 --
1.1 Safety combination EN 1717 incl. holder ME82375 ME49600
1.2
Tap water supply hose EN 1717
ME24930 ME49600
2 Cold water adapter 3/4" to 1/4" (direct connection water hose) ME09037 --
3 MELAdem 40 ion exchanger ME01049 --
3.1 Hose PUR (black) 6/4 mm (inlet hose MELAdem40) ME28820 MELAdem 40
3.2 Hose PUR (black) 6/4 mm (inlet hose feed water) ME28820 MELAdem 40
3.3 Filter for MELAdem ME48240 MELAdem 40
4 Water tap (on site) -- --
5 MELAquick 12+/12+ p -- --
5.1 Wastewater container, complete ME74215 MELAquick
5.1.1
Hose PTFE (8/6 mm, wastewater hose)
ME39180 --
5.2
Connecting cable for water container (for water level
monitoring)
ME21353 MELAquick
5.3 Connection of feed water -- MELAquick
5.4 Wastewater connection -- MELAquick
5.5 Connection for water level monitoring in the wastewater
container
-- MELAquick