Mercury 40 Service Manual

CYLINDER HEAD
90-828631R3 MARCH 1999 Page 4A-45
4. Reinstall the fuel pump. Tighten bolts to the specified torque.
5. Reconnect hoses. Use sta-straps to fasten all hose connections.
6. Reconnect the throttle and shift levers.
53726
e
c
d
b
a
a-Breather Hose
b-Top Fuel Hose
c-Vent Hose
d-Throttle and Shift Levers
e-Sta-Straps
Fuel Pump Mounting Bolt Torque
75 lb-in. (8.5 Nm)

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000