Mercury 40 Service Manual

CYLINDER BLOCK/CRANKCASE
Page 4B-4390-828631R3 MARCH 1999
13. Reconnect hoses. Use sta-straps to fasten all hose connections.
53726
d
c
b
b
a
a-Breather Hose
b-Fuel Hose (2)
c-Remote Fuel Hose
d-Sta-Straps
Powerhead Installation
1. Install powerhead and new gasket with 8 bolts. Tighten bolts to the specified torque.
53868
a
b
a-Powerhead Mounting Bolts (4 Each Side)
b-Gasket
Powerhead Mounting Bolt Torque
28.0 lb-ft (38.0 Nm)

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000