BIGFOOT GEAR HOUSING
90-828631R3 MARCH 1999 Page 6B-43
Oil Sleeve Installation
1. Install oil sleeve with tab positioned as shown.
53934
a
b
a-Oil Sleeve
b-Tab
Upper Driveshaft Bearing Installation
1. Lubricate I.D. of bearing holder and O.D. of bearing with 2-4-C w/Teflon.
2. Press bearing into sleeve using mandrel from bearing installation tool (91-14309A1).
19164
a
b
c
d
95
2-4-C w/Teflon (92-850736A1)
91-13781
95
a-Bearing Sleeve
b-Tapered End
c-Bearing; Numbered Side Toward Mandrel
d-Mandrel (91-13781); From Bearing Installation Tool (91-14309A1)
To Next Page
Loading...
