Mercury 40 Service Manual

BIGFOOT GEAR HOUSING
90-828631R3 MARCH 1999 Page 6B-33
Bearing Carrier Reassembly
1. Lubricate O.D. of bearing and bearing carrier bore with Quicksilver 2-4-C w/Teflon.
2. Protect lip on forward side of bearing carrier, using bearing installation tool (91-13945).
3. Press propeller shaft needle bearing (number side toward mandrel 91-15755) into
carrier, until bearing bottoms out.
21042
a
b
c
95
2-4-C w/Teflon (92-850736A1)
95
91-13945
91-15755
a-Bearing Installation Tool (91-13945)
b-Mandrel (91-15755)
c-Suitable Driver Rod

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000