Mercury 40 Service Manual

LUBRICATION
Page 4C-2 90-828631R3 MARCH 1999
Oil Pump Removal
1. Refer to section 4A for Cylinder Head Removal.
2. Remove oil pump bolts, separate oil pump from cylinder head.
a
a-Bolts (4) M6x35
Oil Pump Disassembly
1. Heat screws to loosen Loctite sealant. Remove screws.
a
a-Screw (2) Heat Screws to Loosen Loctite Sealant

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000