Mercury 40 Service Manual

POWER TRIM
Page 5C-24 90-828631R3 MARCH 1999
Hydraulic System Troubleshooting Flow Chart
Replace trim system.
continued
Replace suction seat
assembly.
Remove suction seat as-
sembly and inspect for
debris and/or damage.
Debris and/or damage
identified.
Trim system holds
reverse thrust. Test-
ing complete.
Trim will not hold
reverse thrust.
Suction seat assembly
appears O.K. - Clean and
reinstall suction seat
assembly.
Trim system holds
reverse thrust. Test-
ing complete.

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000