POWER TRIM
90-828631R3 MARCH 1999 Page 5C-49
3. Position trim cylinder assembly (bottom first) between clamp brackets.
4. Apply 2-4-C Marine Lubricant to lower pivot pin. Using a suitable punch, drive lower
pivot pin into clamp bracket and trim cylinder assembly until pivot pin is flush with out-
side surface.
51147
95
b
55467
a
95
2-4-C w/Teflon (92-850736A1)
a-Trim Cylinder Assembly
b-Lower Pivot Pin
5. Using a suitable punch, drive lower dowel pin into its hole until seated.
6. Apply 2-4-C Marine Lubricant to surface of upper pivot pin, pivot pin bore and trim ram
bore.
51148
95
b
c
d
51148
a
95
2-4-C w/Teflon (92-850736A1)
a-Lower Dowel Pin
b-Pivot Pin
c-Pivot Pin Bore
d-Trim Ram Bore
To Next Page
Loading...
Need help?
General
