Mercury 90-863160

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-48 90-863160 MAY 2000
5. Place hose clamp over bellows end.
22450
a
b
c
a-Mounting Surface
b-Grounding Clip
c-Hose Clamp
6. Place bellows expander tool into first bellows convolution.
22161
a-Expander Tool (91-45497A1)
7. Pull tool until tool touches the mounting flange on bell housing (bellows starts to slip onto
flange) then release tool.
22116
c
a
d
b
a-Expander Tool (91-45497A1)
b-Bell Housing Flange
c-Exhaust Bellows
d-Hose Clamp
8. Reposition tool into the third bellows convolution.
9. Pull bellows onto bell housing flange.