Section 3 - On the Water
90-866938081 MAY 2009 Page 59
8.
9. To adjust your course while "AUTO HEADING" is engaged, see Course Adjustment
Using the Turn Buttons or Joystick.
10. To disengage Auto Heading refer to Disengaging Auto Heading.
11. Press the "AUTO HEADING" button a second time, Auto Heading goes to Standby
mode and all lights other than "STANDBY" turn off.
COURSE ADJUSTMENT USING THE TURN BUTTONS OR JOYSTICK
While in "AUTO HEADING" mode, the "TURN" buttons (course adjust buttons) change the
set course heading each time they are pressed. Tapping the joystick left or right adjusts
your course for each tap.
1. Press the "TURN" button in the direction of the desired heading change. Each press
of the button changes the desired heading by 10°.
27699
a - Port "TURN" button
b - Starboard "TURN" button
2. Move (press) the joystick in the desired direction to make small adjustments in the
chosen heading. Each recognized movement adjusts the chosen heading by 1°.
To Next Page
Loading...
