Section 5 - Maintenance
Page 84 90-866938081 MAY 2009
Routine Maintenance
Task Interval Maintenance to be Performed
Each day start and when
refueling
• Check the steering actuator and trim tab oil (fluid) level.
• Check the gear lube level in the gear lube monitor.
• Check the transmission oil (fluid) level.
Every two months of operation
• Check the battery connections and fluid level.
• Treat the power package components inside the boat with Corrosion
Guard to protect the product from corrosion.
• Ensure that the gauges and the wiring connections are secure. Clean
the gauges (every two months or every 50 hours, whichever occurs
first. If operating in saltwater, the interval is reduced to every 25 hours
or 30 days, whichever occurs first).
Scheduled Maintenance
IMPORTANT: The drive gear case and gear lube monitor in the vessel have been filled
with break‑in gear lube. Break‑in gear lube must be changed after 25 hours and not to
exceed 30 hours of operation to prevent premature gear wear. The color of break‑in gear
lube is brown.
Drain the drive and gear lube monitor of the break‑in gear lube and fill with the specified
gear lubricant. Refer to Drive Gear Lube.
To Next Page
Loading...
Need help?
General