Section 5 - Maintenance
Page 104 90-866938081 MAY 2009
11. Install the drive cover if it was removed. Refer to Installing the Drive Cover.
12. If your model is equipped with a drive cover, install the access cover.
a. Insert the molded clip on the aft end of the hatch cover under the indented‑edge
of the cover.
a - Access cover
b - Molded clip
c - Indented edge
b. Align the access cover with the opening in the top cover.
c. Press down evenly on the front of the access cover. A click‑sound can be heard
when the access cover snaps into final position.
Completing the access cover installation
Filling
You can fill the transmission with oil through the access cover on the drive cover or with
the drive cover removed.
To Next Page
Loading...
