98
Chapter 4 Congure the Router in Wireless Router Mode
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to
reach the tested host, and measure transit delays of packets across an
Internet Protocol network.
2 ) Enter the IP Address or Domain Name of the tested host.
3 ) Modify the Ping Count number and the Ping Packet Size. It’s recommended
to keep the default value.
4 ) If you have chosen Traceroute, you can modify the Traceroute Max TTL. It’s
recommended to keep the default value.
4. Click START to begin the diagnostics.
The gure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through Ping.
To Next Page
Loading...
