Mercusys MR27BE - Internet

14
Chapter 4 Congure the Router in Wireless Router Mode
• DHCP Server - This eld displays the current settings of DHCP (Dynamic Host
Conguration Protocol) Server, and you can congure them on the Network >
DHCP Server page.
• DHCP Server - Indicates whether the DHCP server is enabled or disabled. It
is enabled by default and the router acts as a DHCP server.
• IP Address Pool - The IP address range for the DHCP server to assign IP
addresses.
• Dynamic DNS - This eld displays the current settings of the Dynamic DNS
(Domain Name System), and you can congure them on the Advanced > Network
> Dynamic DNS page.
• Service Provider - The Dynamic DNS service provider you have signed up
for.
4. 3. 2. Internet
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > Network > Internet.
3. Set up the internet connection and click SAVE.
Dynamic IP
If your ISP provides the DHCP service, please select Dynamic IP, and the router will
automatically get IP parameters from your ISP.
Click RENEW to renew the IP parameters from your ISP.
Click RELEASE to release the IP parameters.
• DNS Address - The default setting is to get an IP address dynamically from your
ISP. If your ISP does not automatically assign DNS addresses to the router, please
select Use the Following DNS Addresses and enter the IP address in dotted-
decimal notation of your ISP’s primary DNS server. If a secondary DNS server