Mercusys MR27BE - Access Control

52
Chapter 4 Congure the Router in Wireless Router Mode
4. 9. 2. Access Control
Access Control is used to block or allow specic client devices to access your
network (via wired or wireless) based on a list of blocked devices (Deny List) or a list
of allowed devices (Allow List).
I want to:
Block or allow specic client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > Security > Access Control.
3. Select the access mode to either block (recommended) or allow the device(s) in
the list.
To block specic device(s):
6 ) Select Deny List and click SAVE.
7 ) Click Add and select devices you want to be blocked. You can see the devices
have been added to the list.