55
Chapter 4 Congure the Router in Wireless Router Mode
To bind the connected device(s):
Locate the ARP List section and enable Bind to bind the IP and MAC addresses of
a specic device.
To add a binding entry:
1 ) Click Add in the Binding List section.
2 ) Click VIEW CONNECTED DEVICES and select the device you want to bind. Or
enter the MAC Address and IP Address that you want to bind.
3 ) Click ADD.
4. 9. 4. ALG
You can view ALG (Application Layer Gateway) settings at Advanced > Security>
ALG. It is recommended to keep them as default.
To Next Page
Loading...
