Mercusys MR27BE - Dmz

46
Chapter 4 Congure the Router in Wireless Router Mode
RouterXbox
LAN
WAN
If necessary, you can follow the steps to change the status of UPnP.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > NAT Forwarding > UPnP and toggle on or o according to your
needs.
4. 6. 4. DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it
is totally exposed to the internet, which can realize the unlimited bidirectional
communication between internal hosts and external hosts. The DMZ host becomes
a virtual server with all ports opened. When you are not clear about which ports to
open in some special applications, such as IP camera and database software, you
can set the PC to be a DMZ host.
Note:
DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ host is
totally exposed to the internet, which may bring some potential safety hazards. If DMZ is not in use, please disable it in time.