Mercusys MR27BE - Additional Settings

40
Chapter 4 Congure the Router in Wireless Router Mode
Method 2: Using the WPS Button on the Web Screen
Click Start on the screen. Within two minutes, enable WPS on your personal device.
A Device-(XX-X X-XX-XX-XX-XX) Connected message should appear on the
screen, indicating successful WPS connection.
Note:
XX-XX-XX-XX-XX-XX is the MAC address of your device.
Method 3: Using the WPS Button on the Router
Press the router’s WPS button. Within two minutes, enable WPS on your personal
device.
4. 5. 7. Additional Settings
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > Wireless > Additional Settings.
3. Congure the advanced settings of your wireless network and click SAVE.
Note:
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.