Mercusys MR27BE - MAC Clone

21
Chapter 4 Congure the Router in Wireless Router Mode
• On Demand - In this mode, the internet connection will be terminated
automatically after a specied inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again.
• Manual - In this mode, the internet connection is controlled manually by
clicking the Connect/Disconnect button. This mode also supports the Max
Idle Time function as On Demand mode. Enter a maximum time (in minutes),
the internet connection can be inactive before it is terminated into the Max
Idle Time. The default value is 15 minutes. If you want the internet connection
remains active all the time, enter 0 (zero).
Note:
Sometimes the connection cannot be terminated although you have specied the Max Idle Time because some applications
are visiting the internet continually in the background.
4. 3. 3. MAC Clone
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > Network > Internet and locate the MAC Clone section.
3. Congure Router MAC Address and click SAVE.
• Use Default MAC Address - Do not change the default MAC address of your
router in case the ISP does not bind the assigned IP address to the MAC
address.
• Use Current MAC Address - Select to copy the current MAC address of the
computer that is connected to the router, in case the ISP binds the assigned
IP address to the MAC address.
• Use Custom MAC Address - Select if your ISP requires you to register the
MAC address and enter the correct MAC address in this eld, in case the ISP
binds the assigned IP address to the specic MAC address.