36
Chapter 4 Congure the Router in Wireless Router Mode
Tick this checkbox if you want to allow the wireless clients on your guest
network to communicate with each other via methods such as network
neighbors and Ping.
• Allow guests to access my local network
Tick this checkbox if you want to allow the wireless clients on your guest
network to communicate with the devices connected to your router’s LAN ports
or main network via methods such as network neighbors and Ping.
4. Click SAVE. Now you can ensure network security and privacy!
4. 5. 4. IoT Network
This feature further secures your home network by allowing you to create a
dedicated wireless network to manage your loT devices together, such as smart
lights and cameras.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Advanced > Wireless > IoT Network.
3. Create an IoT network as needed.
1 ) Tick the Enable checkbox for the 2.4GHz, or 5 GHz wireless network. For the
5 GHz network, make sure your IoT devices can connect to a 5 GHz network.
2 ) Customize the SSID. Don‘t select Hide SSID unless you want your IoT devices
to manually input the SSID for network access.
3 ) Select the Security type and customize your own password. If None is
selected, no password is needed to access the IoT network.
To Next Page
Loading...
