Mercusys MR27BE - MLO Network

33
Chapter 4 Congure the Router in Wireless Router Mode
support OFDMA, can you fully enjoy the benets.
• MU-MIMO - A router with the MU-MIMO feature serves multiple devices
simultaneously while a traditional router serves only one user at a time. That
means MU-MIMO can provide a faster, more ecient Wi-Fi network for multi-users.
Note: Devices supporting 5GHz wireless band can enjoy the MU-MIMO service.
• Smart Connect - This feature allows the router’s 2.4GHz and 5GHz bands to use
the same wireless settings. The router can balance network demand and assign
devices to the optimum band.
• 2.4GHz/5GHz - Select this checkbox to enable the 2.4GHz/5GHz wireless network.
• Network Name (SSID) - Enter a value of up to 32 characters. The same Name
(SSID) must be assigned to all wireless devices in your network.
• Hide SSID - Select this checkbox if you want to hide the network name (SSID) from
the Wi-Fi network list. In this case, you need to manually join the network.
• Security - Select an option from the Security drop-down list. We recommend you
don’t change the default settings unless necessary.
• Transmit Power - Select High, Middle or Low to specify the data transmit power.
The default and recommended setting is High.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. For the 2.4 GHz
and 5GHz bands, it is recommended to leave the channel to Auto, if you are not
experiencing the intermittent wireless connection issue. For the 6GHz band,
choose whether to Enable PSC. When PSC (Preferred Scanning Channel) is
enabled, only channels with higher connectivity will be reserved to ensure 6GHz
device connections.
• Mode - You can choose the appropriate “Mixed” mode.
4. 5. 2. MLO Network
MLO (Multi-Link Operation) network enables the connected Wi-Fi 7 clients to
simultaneously send and receive data across dierent frequency bands, greatly
improving the transmission rate and reliability.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to Wireless or Advanced > Wireless > Wireless Settings, and locate the MLO
Network section.