Mercusys MR27BE - Diagnostics

117
Chapter 5
Congure the Router in Access Point Mode
• Email From: Enter the email address used for sending the system log.
• Require Password: Generally, Require Password should be selected if the login of
the mailbox requires username and password.
• Username: Enter the email address used for sending the system log.
• Email Password: Enter the password to login the sender’s email address.
• SMTP Server: Enter the SMTP server address. SMTP server is available for users in
most webmail systems. For example, the SMTP server address of Hotmail is smtp-
mail.outlook.com.
• Email To: Enter the recipient’s email address, which can be the same as or dierent
from the sender’s email address.
• Mail Log Automatically: If selected, the router will automatically send the system
log to the designated email address.
• Frequency: Specify how often the recipient will receive the system log.
• Mail Time: Specify when the recipient will receive the system log.
5. 7. Diagnostics
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.