Mercusys MR27BE - Language

120
Chapter 5
Congure the Router in Access Point Mode
• To set up Daylight Saving Time:
1. In the Daylight Saving Time section, tick the Enable box.
2. Select the start time from the drop-down list in the Start elds.
3. Select the end time from the drop-down list in the End elds.
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as rewall. You must specify your time zone once you log in to
the router successfully; otherwise, time-based functions will not take eect.
5. 9. Language
This function allows you to set the language for the system.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set
for the router.
2. Go to System > Time & Language.
3. In the Language section, choose your desired language.
4. Click SAVE.